|
Residential
Projects
·
Garage, Kent, WA, 2007
Structural design for (1) story 3,900 ft2 residential garage out building constructed using
timber framing with 16 foot high walls, plywood shear walls and supported on conventional
continuous perimeter concrete foundations. Roof framing consisted of premanufactured roof
trusses.
·
Residence, Kirkland, WA, 2005
Structural design for (2) story 5,000 ft2 custom residence constructed using timber
platform framing with plywood shear walls and supported on conventional continuous
perimeter concrete foundations. Roof framing consisted of premanufactured roof trusses.
We used a Box Beam to create large open span of 30 feet and keep a flush ceiling. We
designed openings through the Box beam for access to attic storage on the far side. The Buyer
was impressed with large open area which increased the value of the sale.
·
Residence, Auburn, WA, 2005
Structural design for (3) story 8,000 ft2 custom residence constructed using timber
platform framing with plywood shear walls and supported on conventional continuous
perimeter concrete foundations and retaining walls. Roof framing consisted of premanufactured
roof trusses with a custom fan shaped roof over the 3rd story master bedroom.
|
Typical
Residential Plans and Details
The Plans and Details
shown below were created using AutoCAD 2000.
|
Typical
Framing Plan Sheet
|
|
Typical
Framing Detail Sheet
|
|
Detail of a
Box Beam
|
|
